Frederick County, MD  ·  Serving Local Commercial Contractors

Fast. Local. Panel Tags Often Same Day.

We're right here in Frederick County — the easiest local way to handle your panel tags. Send us your circuit list, we format it, proof it, and produce it, often the same day. Currently serving commercial electrical contractors throughout the area.

✆  Call Us Today Request a Quote →
VisionCraft
Engraved Circuit Labels
Rowmark LaserMax
3Φ  ·  208Y/120V  ·  225A Bus  ·  42-Space  ·  NEMA Type 1
225A
Main Disconnect
225A · 2-Pole · 240V
Series Rating: 65kAIC
── Branch Circuits ──
30A/2P
1 – 3
RTU-1 · Cooling
Rooftop Unit — West Wing
20A/2P
5 – 7
Server Room A/C
Data Center Cooling
20A/2P
9 – 11
Elevator Power
Drive & Controls
20A
13
Lighting — Zone A
North Wing Office
20A
15
Lighting — Zone B
Lobby & Common Area
20A
17
Security / Access
Cameras & Card Readers
20A
19
Fire Alarm System
Life Safety — FA Panel 1
20A
21
Emergency Lighting
Exit & Egress — Life Safety
Rowmark LaserMax · CO₂ Engraved · Permanent
VisionCraft · (240) 394-8296
Commercial 3φ panelboard with VisionCraft laser-engraved circuit labels
✓ No Setup Fees
✓ No Minimum Order
✓ No Artwork Fees
✓ 3M Adhesive Included
✓ Mounting Holes Free
✓ 1–2 Day Turnaround
★ ★ ★
MADE IN U.S.A.
Why VisionCraft

Everything your crew needs.
Nothing they don't.

We eliminated every hidden cost and friction point that makes ordering panel labels a hassle — so your team can focus on the job.

⚡
Built for Electrical Work
Circuit directory cards, breaker labels, sub-panel tags, load center schedules, arc flash labels — if it goes on or near a panel, we engrave it. Every label is cut to your exact spec, not a standard catalog size.
🏷️
Permanent Laser Engraving
Unlike printed or thermal labels, laser engraving physically removes material. The text is part of the tag itself — it won't fade in UV, peel in heat or humidity, or rub off when a panel gets wiped down. Lasts the life of the installation.
💰
Zero Hidden Fees
No setup charges. No plate fees. No artwork or file preparation fees. No minimums. You pay only for the labels you order — we quote you before we start, so there are never any surprises at the end.
📐
Any Size You Need
Width 1.0″ to 12.0″, height 0.5″ to 6.0″. Need a non-standard size to fit a specific panel slot or enclosure? Custom dimensions are available — just send us the measurement.
🔩
Mounting — Always Free
Every label includes 3M peel-and-stick adhesive at no charge. Need to screw it down? We drill 2-hole or 4-hole mounting patterns at no additional charge — just note it when you order.
🕐
1–2 Day Turnaround
Standard orders are ready in 1–2 business days from artwork approval. Tight schedule? Rush same-day or next-day service is available — ask us about rush options when you call or email.
🌦️
Indoor & Outdoor Rated
Rowmark LaserMax is UV-stabilized and chemically resistant — holds up in mechanical rooms, rooftop installations, outdoor enclosures, and anywhere subject to heat, cold, moisture, or cleaning agents.
📦
Volume Breaks, No Contracts
Order more, save more — volume pricing applies automatically as your quantity grows. No contracts, no commitments. Order for one job today, more next week. Mix sizes in a single order. No minimum, no expiration.
🤝
Local Maryland Service
Based in Ijamsville, MD. Call and you'll reach someone who can answer immediately — not a ticket queue. Proofs provided before production on every order. Pick up locally or ship direct to the job site.
The Material
UV-Stable, Laser Engraved Panel Labels

Rowmark LaserMax
2-Ply Acrylic

Custom Cut & Engraved · UV-Stable · Made in U.S.A.

Not all labeling materials hold up in all environments. We use Rowmark LaserMax — the industry standard for permanent laser-engraved panel labels — because it survives everything a working electrical installation throws at it.

  • Two-layer acrylic — top color engraves cleanly away to reveal a crisp contrasting core
  • UV-stabilized — won't yellow, chalk, or fade outdoors or under fluorescents
  • Chemical resistant — survives solvents, cleaning agents, and electrical fluids
  • 1/16″ (0.0625″) rigid construction — stays flat against any surface
  • Operating range −40°F to +180°F — suitable for mechanical rooms and rooftops
  • Laser-compatible for razor-sharp, high-contrast text at any size
PropertySpecification
MaterialRowmark LaserMax 2-Ply Acrylic
Thickness1/16″ (0.0625″ / 1.6 mm)
Width Range1.0″ – 12.0″ (0.5″ increments)
Height Range0.5″ – 6.0″ (0.25″ increments)
Adhesive3M pressure-sensitive (included)
Mounting Holes2-hole or 4-hole (no charge)
UV RatingOutdoor rated, UV-stabilized
Chemical ResistanceExcellent (industrial grade)
Temp Range−40°F to +180°F
Engraving MethodCO₂ laser (permanent)
Color Options

Standard & Custom Color Combinations

We stock standard industry color combinations for quick turnaround, plus over 80 color options for custom projects.

Red / White
Vibrant Orange / Black
Yellow / Black
Bright Green / White
Blue / White
White / Black
Grey / White
Grey / Black
Black / White

Engraving removes the top layer to reveal the contrasting core color. Ask about our full catalog of 80+ color combinations.

Getting Started

Getting a quote is simple.

No lengthy forms, no account creation, no waiting. Just send us your list and we'll have a quote and a proof ready — often the same day you call.

What to send us:

  • 1
    Circuit names — whatever you call them on your schedule or blueprint. We'll format them exactly as written.
  • 2
    Label size — width × height in inches. Custom and contour cuts available
  • 3
    Quantity — how many of each size. Volume pricing applies automatically — no need to ask.
  • 4
    Color combination — black engraved on white is the most common. We carry dozens of color combos; just ask.
  • 5
    Mounting preference — 3M peel-and-stick, 2-hole, or 4-hole screw mount. All included at no charge.

A spreadsheet, a plain-text email, or just a phone call — any format works. We'll handle the rest.

▶  What happens after you reach out
📋
We format your legend — we build a clean layout from your list at no extra charge. No artwork files needed on your end.
✉️
You approve the proof — we send a digital layout before we cut anything. You confirm that the text, spacing, and sizing look right.
⚡
We laser engrave your order — once approved, production begins immediately. Standard turnaround is 1–2 business days. Often orders can be ready the same day.
📦
Pick up or ship — pick up locally in Urbana, MD or we ship direct to your job site or office. Rush delivery available Wednesday - Friday.
Applications

Where our labels work

Trusted by electrical contractors, facilities managers, and industrial operations wherever a permanent, professional label is required.

⚡
Electrical Panels
Circuit directory, breaker IDs, load centers
🔌
Sub-Panels
Distribution boards, schedule tags
⚠️
Safety & Arc Flash
Warning labels, NFPA markings
🏭
Industrial Controls
Machine labels, control panel IDs
🔧
Maintenance
Valve tags, pipe labels, lockout
🏢
Facilities
Room IDs, equipment tags, door signs
🏗️
Construction
Rough-in marking, temp-power labels
🏛️
Government & Institutional
Compliance labels, asset tags
Process

Ready in four easy steps

No complicated artwork process. No portals. Just call or email with your list.

1
Send Your List
Call, email, or send a spreadsheet with circuit names, sizes, and quantity. No artwork files needed.
2
Approve a Proof
We send a digital layout before we cut anything. You confirm the text and spacing look right.
3
We Laser Engrave
Approved orders go straight into production. Standard turnaround is 1–2 business days. Orders are often ready the same day.
4
Pick Up or Ship
Collect locally in Urbana, MD or ship directly to your job site or office. Rush delivery to your office available Wednesday - Friday.

We're right here in Frederick County.

Call or email with your circuit list. We'll format it, send you a proof, and have it ready — often the same day.

✆  Call (240) 394-8296
📧 info@visioncraft.com
🌐 idtagsource.com
📍 9639 Doctor Perry Rd #121, Ijamsville, MD 21754